Size: 1 Liter
Coverage: 100 to 300 sqft depending on the porosity of the stone.
Ultimate protection from oil, grease and water stains.
The highest quality stain protection available, 314P is a silicone impregnator suitable for use on all natural stones regardless of finish type. Use 314P for both interior and exterior applications for maximum protection from oil and water borne stains. 314P allows the stone to breathe naturally, cures quickly and offers a totally natural appearance.
Coverage: 100 to 300 sq. feet per liter depending upon the porosity of the stone.
VOC Info
748.2 g per liter. This coating is to be applied without thinning or diluting. Close container when not in use.
- Clean surface throughly
- Allow surface to dry completely (normally 24 hrs.) before impregnation treatment
- Protect all solvent sensitive surfaces adjoining the work area
- Apply 314P undiluted directly to small, manageable areas using a sprayer, brush or roller
- Allow 10 to 15 minutes for impregnator to penetrate the surface. Do not allow product to dry, re-wet where needed
- Apply a second application, wet on wet
- Allow 5 minutes for penetration of the second application
- Completely remove all excess product using a squeegee or towel. No product should remain on the completed surface.
- Allow to dry for 48 hours before covering or beginning maintenance
Test in a small area prior general application to determine application amounts and appearance.
Flammable. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Harmful: may cause lung damage if swallowed. Repeated exposure may cause skin dryness or cracking. Keep out of the reach of children. Do not breathe vapor. Avoid contact with skin. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label. See MATERIAL SAFETY DATA SHEET, for further information.
Contents - naphtha (petroleum), hydrodesulphurized heavy (CAS-No.064742-82-1)
